CISCO - Configuring Cisco MDS 9000 Switches (DCMDS)
Kurssprache Deutsch, Schulungsunterlagen Englisch. The Configuring Cisco MDS 9000 Series Switches (DCMDS) v3.1 course shows you how to implement, manage, and troubleshoot Cisco® MDS 9000 Series ...
Kursinfo
Kurssprache Deutsch, Schulungsunterlagen Englisch.
The Configuring Cisco MDS 9000 Series Switches (DCMDS) v3.1 course shows you how to implement, manage, and troubleshoot Cisco® MDS 9000 Series Switches, to build highly available, scalable storage networks. Through expert instruction and extensive hands-on practice, you will learn how to deploy and use capabilities such as Virtual Storage Area Networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more. You will learn how to configure and implement platform features and learn troubleshooting techniques pertaining to Fibre Channel (FC) domains, firmware upgrades, zones, and zone mergers. This course prepares you for Cisco CCNP Data Center and Cisco Certified Specialist - Data Center SAN Implementation certifications.
This course helps you prepare to take the exam, Implementing Cisco Storage Area Networking (300-625 DCSAN), which leads to CCNP Data Center® and the Certified Specialist - Data Center SAN Implementation certifications.
Hinweis: Dieses Seminar führen wir in Kooperation mit der Fast Lane GmbH durch.
Inhalt:
Describing Cisco MDS Platform
- Cisco MDS 9700/9300/9200/9100 Hardware
- Cisco NX-OS
- Cisco DCNM
- Fibre Channel Architecture
- FCoE Architecture
Describing Key Product Features
- Cisco DCNM 11.x
- RBAC and Authentication, Authorization, and Accounting (AAA)
- Virtual SANs
- NPV and NPIV
- Port Channels and VSAN Trunking
- Zoning and Smart Zoning
- Device Aliases
- Inter-VSAN Routing
- Fibre Channel Fabric Security
Describing New Product Features
- 32-Gb Fibre Channel
- Cisco MDS NX-API
- Power-On Auto-Provisioning
- Slow Drain Analysis
- SAN Analytics and Telemetry Streaming
- Cisco Secure Boot
Deploying Cisco MDS Features
- Installation and Initial Setup
- Building a Fabric: FC Domains and FC Services
- Building SAN Extensions
Troubleshooting Common Cisco MDS Issues
- Fibre Channel Domains
- Zones and Zone Merges
- Boot and Upgrade Issues
Zielgruppe
- Data center systems engineers - Data center field engineers - Data center architects - Technical decision makers - Network architects - Cisco integrators and partners
Voraussetzungen
To fully benefit from this course, you should have the following knowledge and skills: - Basic understanding of data storage hardware components and protocols, including Small Computer System Interface (SCSI) and Fibre Channel - Basic understanding of network protocols, including Ethernet and IP - Basic routing and switching knowledge These are the recommended Cisco courses that may help you meet these prerequisites: - Implementing and Administering Cisco Solutions (CCNA) and - Understanding Cisco Data Center Foundations (DCFNDU)
Abschluss/Bescheinigung
Teilnahmezertifikat
Informationsanfrage
Unverbindliche und kostenfreie Informationsanfrage zum Kursthema: "CISCO - Configuring Cisco MDS 9000 Switches (DCMDS)"
